Acrylic foam tape usage suggestion
1.Adhesive surface for cleaning
The appropriate surface treatment can greatly improve the quality of bonding, bonding surface should be clean, dry, smooth, not rust, oil.
We recommended 50% isopropyl alcohol as the cleaning solution. For heavy oil pollution, methyl ethyl ketone or other strong solvents may be used, but at last it is still necessary to use 50% isopropyl alcohol.(*Attention mark :When using solvents, Extinguish all flames and in accordance with the manufacturer's instructions and instructions when use it).
2.For some special surface, can be used in paint brushing the surface at the end of the tape to ensure construction.
(*when tape primer dried ,tape can be bonded)
3.Adhesive tape, take the acrylic foam tape to the adhesive surface.
4.Balance , bonded contact and smooth the surface, remove release material of acrylic foam .
5.Adhesive then compacted,Adhesive tape should be applied enough pressure, sufficient pressure can help pressure-sensitive adhesive flow and infiltration, improve the contact area of the adhesive and the substrate to improve the bonding strength.
6.Curing durations ,Acrylic foam tape adhesive products need to be placed for 72 hours in order to achieve maximum bond strength, about 10 minutes after the operation intensity can be achieved, can be moved. Such as the use of primer, can greatly accelerate the speed of establishing strength.